[Bioperl-l] Bio::Tools::Run::Cap3 - Parameters

Jonathan Crabtree jonathancrabtree at gmail.com
Wed May 6 15:45:32 UTC 2009


The "new" argument to Cap3 expects an array, not a string.  So I think you
need to do this:

my $cap3Factory = Bio::Tools::Run::Cap3->new('y',  '150');

rather than this:

my $cap3Factory = Bio::Tools::Run::Cap3->new('y 150');

Otherwise it will silently ignore the parameter.  There are also several
problems with the Cap3 module itself, at least the version shown here:

http://cpansearch.perl.org/src/CJFIELDS/BioPerl-run-1.6.1/Bio/Tools/Run/Cap3.pm

Those problems are:

1. "y" is not in the PARAMS array, as Brian and Kevin have noted
2. $PROGRAMDIR appears to be hard-coded to /usr/local/bin (OK if that's
where your cap3 is installed)
3. The run() method does this:

my $commandstring = $exe . $param_string . " $infilename1";

but at least for the version of cap3 I'm using, you need to put the
$param_string _after_ the $infilename1 for it to work.  Once all these
things are corrected it worked for me and correctly passed the -y 150 to
cap3 when new() was called as shown above.

Jonathan


On Wed, May 6, 2009 at 11:23 AM, Kevin Brown <Kevin.M.Brown at asu.edu> wrote:

> BEGIN {
>
>    @PARAMS     = qw(a b c d e f g m n o p s u v x);
>    $PROGRAMDIR = '/usr/local/bin';
>
>    # Authorize attribute fields
>    foreach my $attr (@PARAMS) { $OK_FIELD{$attr}++;
>
> }
>
> That is the list of params that Cap3 will accept in the BioPerl module.
> I'm guessing if you add the y to that list that it might work.
>
> > -----Original Message-----
> > From: bioperl-l-bounces at lists.open-bio.org
> > [mailto:bioperl-l-bounces at lists.open-bio.org] On Behalf Of
> > Michael Stubbington
> > Sent: Wednesday, May 06, 2009 7:39 AM
> > To: bioperl-l at lists.open-bio.org
> > Subject: [Bioperl-l] Bio::Tools::Run::Cap3 - Parameters
> >
> > Dear all,
> >
> >
> >
> > I am using the Bio::Tools::Run::Cap3 wrapper to the Cap3 assembly
> > program. I have some reads that will only assemble if cap3 is
> > used with
> > the '-y 150' option. This is fine from the command line but I
> > can't work
> > out how to pass this option to the Cap3 factory object in my script.
> >
> >
> >
> > If I do the following
> >
> >
> >
> > my $params =  "y 150" ;
> >
> > my $cap3Factory = Bio::Tools::Run::Cap3->new($params);
> >
> > my $assembly = $cap3Factory->run($file);
> >
> >
> >
> > Then I get an exception as follows:
> >
> >
> >
> > ------------- EXCEPTION: Bio::Root::Exception -------------
> >
> > MSG: Unallowed parameter: y !
> >
> > STACK: Error::throw
> >
> > STACK: Bio::Root::Root::throw
> > /Users/mike/lib/perl5/site_perl/5.8.9/Bio/Root/Root.pm:357
> >
> > STACK: Bio::Tools::Run::Cap3::AUTOLOAD
> > /Users/mike/lib/perl5/site_perl/5.8.9/Bio/Tools/Run/Cap3.pm:116
> >
> > STACK: Bio::Tools::Run::Cap3::new
> > /Users/mike/lib/perl5/site_perl/5.8.9/Bio/Tools/Run/Cap3.pm:101
> >
> > STACK: /Users/mike/perlScripts/QGenotype.pl:150
> >
> >
> >
> > If I don't try to pass any parameters to Cap3 it runs fine but just
> > fails to assemble the reads that need the -y 150 flag.
> >
> >
> >
> > I'd very much appreciate any help with this. I'm pretty new
> > to bioperl,
> > hope I haven't missed anything obvious!
> >
> >
> >
> > Thanks in advance,
> >
> >
> >
> > Mike
> >
> >
> >
> > --------------------------------------------------------------
> > ----------
> > ----
> >
> > Mike Stubbington
> >
> > Novel and Dangerous Pathogens
> >
> > Health Protection Agency
> >
> > Centre for Emergency Preparedness and Response
> >
> > Porton Down
> >
> > Salisbury
> >
> > SP4 0JG
> >
> >
> >
> > Tel: +44 1980 619812
> >
> >
> >
> >
> >
> > -----------------------------------------
> > **************************************************************
> > ************
> > The information contained in the EMail and any attachments is
> > confidential and intended solely and for the attention and use of
> > the named addressee(s). It may not be disclosed to any other person
> > without the express authority of the HPA, or the intended
> > recipient, or both. If you are not the intended recipient, you must
> > not disclose, copy, distribute or retain this message or any part
> > of it. This footnote also confirms that this EMail has been swept
> > for computer viruses, but please re-sweep any attachments before
> > opening or saving. HTTP://www.HPA.org.uk
> > **************************************************************
> > ************
> > _______________________________________________
> > Bioperl-l mailing list
> > Bioperl-l at lists.open-bio.org
> > http://lists.open-bio.org/mailman/listinfo/bioperl-l
> >
>
> _______________________________________________
> Bioperl-l mailing list
> Bioperl-l at lists.open-bio.org
> http://lists.open-bio.org/mailman/listinfo/bioperl-l
>



More information about the Bioperl-l mailing list